by AE User 1 | Oct 24, 2022 | Case Study
Maintenance and repair work is regularly carried out in areas that contain in-service pipelines. While necessary, this maintenance must be performed delicately to avoid damaging the existing pipeline infrastructure. Yet even with meticulous prevention efforts, third...
by AE User 1 | Oct 24, 2022 | Case Study
Line Strike at Roadside Valve Station Prompts Emergency OmegaWrap® EG Composite Repair Written by Allan Edwards As most pipelines are located underground, third-party damage typically results from line strikes by excavation equipment during foreign line crossings or...
by AE User 1 | Nov 29, 2021 | Case Study
What Sets Allan Edwards Sleeves Apart? Extensive Validation Testing Through Joint Industry Program (JIP) Participation Written by Allan Edwards There are many repair sleeve manufacturers out there that claim their sleeves are effective. But do they have the data to...
by AE User 1 | Nov 29, 2021 | Case Study
Allan Edwards Pipeline Repair Sleeves Replace Mechanical Clamps for a Cost-Effective Refinery Repair Solution Written by Allan Edwards Repairs are rarely cheap when it comes to pipeline maintenance. These already high rehabilitation costs are further amplified when...
by AE User 1 | Nov 29, 2021 | Case Study
A Tight Squeeze for a Type B Fabricated Repair Sleeve Written by Allan Edwards A Time-Sensitive Issue Extreme spacing restrictions added complexity to a fabricated repair sleeve installation on an above-ground pipeline situated over coastal waters in Florida. Allan...
Recent Comments